Time Square - Pendant
New: We have now upgraded to CRI90 High Efficiency. The new solution enables a high light quality with CRI90 with the same energy consumption as a CRI80 fitting with corresponding light output and has around 20% lower energy consumption compared to previous CRI90 solution.
Material: Frame in extruded aluminium, end caps in cast zinc.
Installation: Supported from wire with 1.5 m wire with friction lock. Suspension system adjustable longitudinally and for height.
System: First luminaire is supplied with end caps. Eccentric lock connects luminaires mechanically.
Connection: Supplied with 3 m cable and plug with free wire ends.
Single luminaire is supplied with halogen-free cable
3G0.75 mm², or 5G0.75 mm² (dimmer).
System start is supplied with halogen-free cable 3G1.5 mm²,
or 5G1.5 mm² (dimmer). Cable length 1, 2, 3, 4 m and optional quick connector is selected in configurator.
System is supplied excluding cable. Quick connector for electrical connection with system luminaire or system start luminaire.
Diffuser: Microprismatic acrylic glass in combination with optical film from BrightView.
Optical diffuser in MIRO material in combination with optical film from BrightView.
Micro lamella louvre in lacquered aluminium in combination with optical film from BrightView.
Opal frosted acrylic glass.
The luminaire is also offered with microprism excluding optical film.
Light distribution: Time has both a direct and an indirect light where the distribution of the light is different depending on diffuser:
Microprism HE: 30% downlight and 70% uplight.
Microprism HO: 40% downlight and 60% uplight.
Optical diffuser: 40% downlight and 60% uplight.
Micro lamella louvre: 30% downlight and 70% uplight.
Opal diffuser: 45% downlight and 55% uplight.
Light source: Including Philips Fortimo LED light source, colour temperature 3000K or 4000K. Colour rendering CRI min. 80 or CRI90 HE.
Chromaticity tolerance max. 3 SDCM. Lifespan: L100B10 50 000hrs.
Driver: Equipped with Philips LED driver Touch and DALI to regulate the light with amplitude modulation creating a flicker-free light. Dimming 1-100%. The luminaire is equipped with 2 ballasts/2 DALI addresses.
The luminaire is delivered as standard with pre-programmed CLO. The CLO function secures and maintains constant lighting levels during the entire lifespan and uses on average 10% less energy during the
lifespan of the luminaire, in comparison with a L80 luminaire.
Other: Luminaire with microprism comes as standard with two different luminous luminaire flux, HE (High Efficiency and HO (High Output).
Tunable White is available on request.
Note the direction of the 90° luminaire. See drawings under Technical information.
Standard finish: White textured RAL9010 or Grey textured RAL9006.
Other colours available upon request.